ON THE LEFT IS A KILN CLOTH MOLD MADE FROM A FIBERGLASS SHAPE FOR A MASK. CENTER AND RIGHT ARE CAST IRON MOLDS ONE A DOME AND THE OTHER HALF A DOME. THE CUT DOME IS BETTER IN SOME WAYS BECAUSE IT TAKES LESS SPACE IN THE KILN BUT THE DOME CAN BE USED TO SLUMP LARGER PIECES. HOWEVER TWO HALF'S WILL SLUMP MORE AREA OF GLASS THE ONE FULL DOME.

BELOW IS A FULL SMALL CONE WITH THE NECESSARY MOLD RELEASE ON IT, ALTHOUGH IT NEEDS TO BE RECOATED!